TURBINE FLOW METER PDF Print E-mail
Written by Administrator   
Wednesday, 17 December 2014 10:59
 

 Applications:-

Turbine flow meter transducer adapts to measure the liquid rate and total flow rate of low viscosity and for clear liquid.

It can be widely used in the fields of petrol, chemical Industry , Metallurgy , Scientific research for measuring or control. 

Several output display methods can be selected.

Technical specification:-

  • High-accuracy: 0.2%, 0.5% , 1%

  • Wearable Tungsten carbonized shaft and bearing
  • Erode-resistant applicable for sea water, ammonia , etc.

  •  

    Bi-Direction measuring bi-direction flow (optional)

  •  

    Multi-output pulse , 4-20mA DC, total and rate display in the field.

  •  

    Power-supply 5-24 V DC,

  •  

    Explosion-proof Ex d II BT4/Ex ib I

  •  

    Pipeline range 6,10,15,25,40,50,80,100,150,200,250,300 mm.

 

 

Turbine Flow meter

         

Description

Type

A

       

Flow sensor pulse output three-wire system, +12V power supply

 

B

       

Local display , powered by 3.6V battery

 

C

       

Local display with 4~20mA ou pulse output,powered by24v.

 

D

       

Flow transmitter 4~20mA output,powered by 24V:

Nominal drift diameter

4

     

 

 

 

Normal flow range m3/hr

0.04~0.25

 

 

Extended flow range m3/hr

0.04~0.4

6

     

0.1~0.6

0.06~0.6

10

     

0.2~1.2

0.15~1.5

15

     

0.6~6

0.4~8

20

     

0.8~8

0.45~9

25

     

1~10

0.5~10

32

     

1.5~15

0.75~15

40

     

2~20

1~20

50

     

4~40

2~40

65

     

7~70

3.5~70

80

     

10~100

5~100

100

     

20~200

10~200

125

     

25~250

12.5~250

150

     

30~300

15~300

200

     

80~800

40~800

Explosion protection

     

Not marked, without explosion protection

B

   

Explosion protection type

Precision class

 

A

 

Precision : Class 0.5

 

B

 

Precision : Class 1.0

NOTE:-

Sensors with pipe diameter of DN4~DN40 are of thread connections with maximum operating pressure of 6.3 Mpa.

Sensors with pipe diameter of DN50~DN200 are of flange connections with maximum operating pressure of 2.5 Mpa.

Sensors with pipe diameter of DN4~DN10 are provided with front and rear straight pipe sections and filters.

Please specify whcn placing an order if flange connections are required for pipe diameter of DN15~DN40

Please specify when placing an order for high pressure type and special requirements.

Last Updated on Tuesday, 17 February 2015 09:15